Inclined Drag Conveyors Feature...
• Galvanized construction.

• Take-up assembly on the head for accessibility.
• Large profile UHMW paddles.

• 2.609" or 4" pitch roller bushed chain.
• 10 gauge center pan.

• Removable 8 gauge bottom.

• 10 gauge sides on 13" and 17" tall conveyor. 8 gauge sides on 21" tall conveyor.

• Head and tail slotted for shaft removal.
• Pillow block bearings head and tail.

• 1/4" UHMW shaft seals head and tail.
• Flame cut hardened steel sprockets head and tail.

Pit Conveyor Optional Features:
• Bend sections are available in 15, 30, and 45 degree.

• By-pass dump hoppers are available in 6', 8' and 10' lengths.
• By-pass inlet in 28" long.

• Sectional dump hopper grating.

• Class I or Class II drives.
• Replaceable 3/16" abrasion resistant bottom with 16 gauge galvanized cover sheet.
• Shock relay.
• Split sprockets.
• Manual or electric discharge gates.

DMC Incline Drag Conveyors are designed for strength and superior performance to maximize operation run time and minimize the length of delivery time.

Optional By-Pass Dump Hopper
and Welded Bar Grating

An optional by-pass dump hopper is available and includes internal screw adjustment for flow control. An optional welded bar grating with grain deflectors provided in 2' wide sections.