| |
DMC
En-Masse Conveyors are designed for strength and superior performance to maximize operation run time and minimize the length of delivery
time.
Trough Sections Feature...
• Dust and weather tight, heavy gauge, peaked
covers on the head, tail and trough.
• Bolted removable bottom construction.
• Standard 10 gauge trough sides.
• Trough sections are fixture assemble for accurate alignment and ease of installation.
• Rail returns are standard on 20" x 20", 26" x 20", 32 x 20" conveyors. Rails are lined with 1/4" abrasion resistant steel and tapered end to end to minimize flight wear
and maximize cleaning. Rails overlap at flange connections for smooth operation.
• Trough sections are flanged with structural angle to provide rigidity and accurate alignment.
• Standard roller chain engineered for each specific conveyor to maximize working load and expected life.
• UHMW flights prevent steel to steel contact.
• UHMW return rollers with shafts bolted to the trough
for easy maintenance and replacement. |
|
| |
 Head
Section
•
Extended mount flange bearings on 12" (304.8 mm) and
14" (355.6 mm) tall conveyors. External mount pillow
block bearings on 20" (508 mm) tall conveyors.
• Flame cut hardened steel sprockets.
• 10 gauge housing on 12" and 14" conveyors, 7 gauge on 20" conveyors.
• Machined 1/4" (6.35 mm) thick UHMW shaft seals.
• Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and bearings as an assembly.
• Head shafts are turned ground and polished.
|
|
 Liner
Packages:
Liner Package #1
3/16" medium hard abrasion resistant bottoms.
Liner Package #2
10 gauge bolted medium hard abrasion resistant side liners and 3/16" medium hard abrasion resistant bottoms.
Liner Package #3
3/16" bolted medium hard abrasion resistant side liners
and 1/4" medium hard abrasion resistant bottoms.
|
| |
 Tail
Section
• Extended mount flange bearings on 12" (304.8 mm) and 14"
(355.6 mm) tall conveyors, External mount pillow block bearings on 20" (508 mm) tall conveyors.
• Heavy duty chain tension take-up system utilizing corrosion resistant acme threaded screws.
• Flame cut hardened steel sprockets.
• Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and bearings as an assembly.
• 10 gauge housing on 12" and 14" conveyors,
7 gauge on 20" conveyors. |
|
