Horizontal power heads are available in 6" (152.4mm), 8" (203.2mm), 10" (254mm), and 12" (304.8mm) sizes. They are single or double direct belt driven depending on the unit, and commercial units may have 2, 3, or 4 belt drives or oil bath reducers.

The 25° incline can be used on bins up to 75' (22.86m) diameter. It comes in sizes of 6" (152.4mm) (horizontal) to 6" (incline), 6" to 8" (203.2mm), 8" to 8", 8" to 10" (254mm), or 10" to 12" (304.8mm). If you want maximum capacity with smooth grain flow, we recommend a larger incline with a smaller horizontal. The 5' (1.52m) length offers about 2' (.61m) of extra discharge height. All inclines have a 2 or 3 belt drive and include an adjustable support stand. An optional wheel kit can be attached to make the support stand portable.

On bins 36' (10.97m) in diameter or smaller, our 14' 6" (4.42m) standard vertical makes it easier to discharge directly into a truck, trailer, or mill. This power head needs only one drive to run both the vertical and under-bin auger. The drive is mounted to a right angle, oil bath gearbox. It can be powered by either a PTO unit or electric motor. The standard vertical package comes with a 3' (.92m) long spout at a 45° discharge, base support, and bin wall mounting brackets. An optional kit is available to connect an 8" (203.2mm) vertical to a 6" (152.4mm) unload tube.

The 16' 6" (5.03m) tall commercial double drive vertical can be used on 24' (7.32m) through 90' (27.43m) diameter bins. Offered in 8" (203.2mm) and 10" (254mm) diameters, this vertical has a two drive system. A separate direct belt drive or 3:1 oil bath reducer drive can be used to operate the horizontal drive. Just like the standard, it includes a 3' (.92m) spout at a 45° discharge, base support, and bin wall mounting brackets. An optional attachment kit joins a 10" (254mm) vertical to an 8" (203.2mm) unload tube.